A Guide To Electricians Swansea Prices: What To Expect
If you’ve ever searched for “electricians Swansea prices”, you’ll know it’s hard to find a straight answer. Some firms give vague estimates, while others avoid publishing prices altogether. And yet, as homeowners or business owners, we all want to know what a job is likely to cost before picking up the phone.
As local electricians, we believe in being transparent. Prices can vary depending on the size of the job, the type of property, and even the time of day – but there are clear factors that influence cost. Let’s break it down.
Why are prices different between electricians?
Not all electricians in Swansea charge the same. Here’s why:
- Qualifications and accreditations – NICEIC or NAPIT-approved contractors may cost slightly more, but you’re paying for guaranteed compliance and safety.
- Type of work – A minor repair is a very different job from a full rewire.
- Emergency callouts – Evening or weekend work usually comes with a premium.
- Materials used – Proper, branded consumer units and fittings cost more than budget alternatives – but they last longer and are safer.
- Location – Hiring a local electrician in Swansea avoids long travel fees.
What are typical callout charges?
Most electricians in Swansea will have a minimum callout fee. This usually covers the first hour of labour and travel. From our experience:
- Standard daytime callout: £50–£80
- Evening or weekend callout: £80–£120
- Emergency overnight callout: £100–£150+
It’s always best to check before booking, so there are no surprises.
How much do common electrical jobs cost in Swansea?
Here’s a rough guide based on local averages. (Every property is different, but these ballpark figures help give an idea.)
- Replacing a socket or switch – £60–£90
- Installing a new light fitting – £70–£120
- Consumer unit (fuse board) upgrade – £450–£650
- Full rewire (2-bed house) – £3,000–£4,500
- EICR (Electrical Installation Condition Report) – £150–£250 for an average home
- PAT testing – £2.50–£5.00+ per appliance, but this varies massively.
Businesses should budget slightly higher, especially for three-phase supplies or more complex installations.
Case study: Llangyfelach rewire
One client in Llangyfelach was quoted wildly different prices for a house rewire – from £2,500 to nearly £6,000. They weren’t sure what to believe. We explained that the variation came from the quality of materials specified, the inclusion (or not) of certification, and how much chasing into walls was needed.
Our detailed quote sat in the middle, but it was transparent. When finished, the homeowner said they valued the clear breakdown more than the number itself, because they knew exactly what they were paying for.
Why cheap isn’t always cheerful
It’s tempting to go with the lowest quote, but in electrical work, you often get what you pay for. We’ve seen “bargain” jobs where:
- Circuits weren’t labelled, leaving homeowners clueless about which breaker controlled what.
- Certificates weren’t provided – meaning the work wasn’t legally signed off.
- Cheap fittings failed within months.
A job done right may cost more upfront, but it saves you money and stress in the long run.
How to make sure you’re getting fair prices
When comparing electricians Swansea prices, here’s what we recommend:
- Get at least 3 quotes – but make sure you’re comparing like for like.
- Check what’s included – does the price cover certification, materials, and VAT?
- Ask about guarantees – a proper electrician should stand by their work.
- Beware of cash-only offers – no paperwork usually means no accountability.
- Look for transparency – a detailed written quote is a good sign.
Do electricians charge per hour or per job?
Both. Some tasks are quoted as fixed prices (like fitting a new consumer unit), while others are charged hourly (like fault-finding). Hourly rates in Swansea generally range between £40–£60.
If the job is likely to take longer, many electricians will give you a capped price so you’re not left guessing.
How to save money on electrical work
A few practical tips:
- Plan ahead – Group small jobs together to make the most of the callout.
- Be flexible – Non-urgent work scheduled during normal hours is cheaper than emergency evenings.
- Invest in quality – Paying a little more for durable fittings means fewer callouts later.
- Stay compliant – Regular inspections prevent costly emergency repairs.
One landlord in Morriston saved money by booking EICRs for three properties at the same time – we handled them all in a day, reducing the per-property cost.
Final thoughts
When researching electricians Swansea prices, remember that cost is only one part of the picture. What you’re really paying for is safety, compliance, and reliability.
A transparent, accredited electrician will always explain their pricing clearly, provide certification, and deliver work that lasts.
If your fuse board looks out of date or you’re unsure about a quote you’ve received, let us take a look. We’ll give you honest advice – and a fair price.